1                                  2                                    3

1. Drain socket with O-ring & safety plug

2. Rubber drain plug for foldable

3. Expanding drain plug for Ribs

4	5

4. To fit the hull drain plug:

- Push the plug into sleeve located in the transom

- To lock, lift handle through 90º as shown by arrow.

5. To fit deck drain plug, also called the condensation valve:

- The deck drain plug is a screw fit into the flange.

- Make sure O-ring is in place.

- Turn anticlockwise to undo, and clockwise to tighten.

Note 1: When open, the deck drain plug is retained by the flange. You should periodically remove it to empty any water build up from between deck and hull.

Note 2: If leaving the boat on davits or storing it out of the water, remove both drain plugs so rain water may drain and/or condensation evaporate.